Product and Service Center
Flat Sheet Membrane
- Product Description
-
The flat sheet membrane elements of Gohigher can be used in submerged membrane bioreactors (MBR). The GHM-MBR flat sheet membrane element is composed of a membrane sheet, a guide cloth, and a guide plate. There is a water outlet at the top of the guide plate. During suction filtration, the activated sludge in the membrane bioreactor is blocked by the membrane in the reactor. Under the action of negative pressure, the water filtered by the membrane sheet is drawn out along the guide plate through the water outlet.
Item
Flat Sheet Membrane
Flux(gal/ft2/day)
8.8~17.7
MLSS(mg/L)
4000~10000
Cleaning interval
6-9 months(In-Place)
Service life
5~10 yrs
Pretreatment
3 mm screen
Fouling control
Air scoring, Chemical cleaning
Advantage
Higher strength, Higher permeability.
Higher flux and lower pretreatment requirement.
Less maintenance required.
Increase aeration efficiency, 30% energy saving
Flat sheet membrane module
The flat-sheet membrane module assembly consists of a membrane tank and an aeration tank. The membrane tank includes a frame, guide rails, and a water collection pipe. The flat-sheet membrane elements are spaced apart within the frame via the guide rails, and the water collection pipe is used to gather the clean water produced by each membrane element. Inside the aeration tank, there are aeration pipes that supply gas for cleaning the flat-sheet membranes.
Type
GHM-80-120
GHM-80-200
GHM-150-120
GHM-150-200
GHM-150-200D
GHM-150LD-120
GHM-150LD-200
GHM-150LD-200D
Cartridge
GHM-FS-F80-V
GHM-FS-F150-V
GHM-FS-F150-V
Dimension
(LxWxH,mm)
1950x727x1780
3080x727x1780
1950x727x2530
3080x727x1780
3080x847x4510
1950x727x2530
3080x727x2530
3080x847x4510
Frame material
SS 304/ SS316
Aeration
ABS, DN65
ABS, DN65
ABS, DN65
ABS, DN80
Manifod
ABS, DN65/DN32